Table of Contents
Advertisement
When the camcorder is first powered ON, the Video Capture Mode will be active. The icons that
appear on the LCD screen are the best default settings so that you can begin to capture and
enjoy clear quality videos and photos.
To change the active camcorder mode, make sure the camcorder is powered ON and press the
MODE button.
When in Video Capture Mode, this icon will display on the top-left corner of the LCD display.
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display.
When in Playback Mode, this icon will display on the top-left corner of the LCD display.
Navigating the Menus
Each camcorder mode has a set of menus specific to that mode.
1.
Press the MENU button to open the menus for the current mode.
2.
Press the LEFT or RIGHT buttons to scroll between the various menus for the current
mode.
3.
Press the UP or DOWN buttons to highlight the desired menu selection.
4.
Press the OK button to confirm and save the highlighted menu option.
5.
If the selection can be remembered by the camcorder, a
right of the selected menu option. Changes made to these options remain as is until you
decide to change them again at a later time.
6.
Some menu options are single-use functions that are not remembered by the camcorder
and do not display this icon when selected.
7.
At any time you can press the MENU button to exit the menus and return to the previous
screen.
selection icon appears to the
12
Advertisement
Table of Contents
