Vivitar DVR 699HD User Manual page 6

When powering the camcorder ON for the first time the camcorder will take you through the
initial setup.
Powering the Digital Camcorder ON
1. Built-in Lithium Battery: Charging Your Battery
To charge your battery, first connect the USB Cable to your camcorder.
Then follow one of the steps below:
A) Charge the battery using the USB connection cable (included) and your computer:
- Connect one end of the USB cable into the USB port on your camcorder.
- Connect the other end of the USB cable to the USB port on your computer.
B) Charge the battery using the USB connection cable (included) and the AC Adapter
(included).
- Connect one end of the USB cable into the USB port on your camcorder.
- Connect the other end to the AC Adapter and then plug the AC Adapter into a power
socket.
NOTE: While charging the battery, the Charge LED Indicator Light turns red. The battery is
fully charged when the Charge LED Indicator Light turns off.
Battery Power:

Some features, will not work if the battery power level is low.

When the battery power is low the battery icon turns red and the camcorder will
automatically turn off a few seconds later.

The energy status of the power is displayed on LCD as shown below:
Full battery power

Please charge the battery when the indicator shows the icon
NOTE: Press the Reset Hole button when the camcorder does not respond. The camcorder can
be restarted without cutting off the power.
Medium battery power
5
Low battery power
. .