Selecting A Channel Via Channel Search Button - Motorola APX 1000 MODEL 3 User Manual

• Select a channel via the MFK:
a) If channel is set as the primary mode, turn the
MFK until the display shows the desired
channel.
If channel is not set as the primary mode, press
the MFK once and repeat this step.
b) Press the PTT button to begin transmitting on
the displayed channel.
• Select a channel via the radio menu Chan:
a)
or to Chan.
b) Press the Menu Select button directly below
Chan.
c) or
keypad to enter the channel number.
If the channel number entered is
unprogrammed, the display shows Invalid
entry. Repeat this step.
d) Press the Menu Select button directly below
Sel to confirm the selected channel.
e) Press the PTT button to transmit on the
displayed zone channel.
• Select a channel via the radio menu Channel Up
52 or Channel Down:
English
to the required channel or use the
a)
or to ChUp or ChDn.
b) Press the Menu Select button directly below
ChUp or ChDn.
Positions of ChUp and ChDn on the display may
differ each time you release the Menu Select
button. Read carefully before you press.
c) Press the PTT button to transmit on the
displayed zone and channel.
Selecting a Channel via Channel Search
Button
This feature allows you to do a quick search for a
specific channel in your radio by keying in the alias of
the channel. If the name matches, your radio prompts
the first found matched channel name.
1 Perform one of the following actions:
• Press the preprogrammed Channel Search
button.
•
or to CSrh and press the Menu Select
button directly below CSrh.
A blinking cursor appears on the Channel Search
screen.