Table of Contents
Advertisement
This Manual: http://www.manuallib.com/file/2597558
B) STR/DIMM_LED
STR/DIMM LED
K) SCR (Smart Card Reader Header)
1
J) IR/CIR (IR/CIR )
1
M) CI (CASE OPEN)
GND
Signal
1
GA-8IRX Motherboard
? Do not remove memory modules while
DIMM LED is on. It might cause short or
other unex pected damages due to the
2.5V stand by voltage. Remove memory
modules only when STR function is
disabled by jumper and AC Pow er cord is
disconnected.
? This MB supports smart card reader. To
enable smart card reader function an optional
smart card reader box is required. Please
contact your autherized distributor.
? Make sure the pin 1 on the IR device is
aling w ith pin one the connector. To
enable the IR/ CIR function on the board,
you are required to purchase an option IR/
CIR module. For detail information please
contact y our autherized G iga-B yte
distributor.
To use IR function only, please connect IR
module to Pin1 to Pin5.
? This 2 pin connector allows y our system to
enable or disable the system alarm if the sys
tem case begin remove.
- 18 -
Advertisement
Table of Contents
