Step 1-2 : Cpu Heat Sink Installation - Gigabyte GA-8IRX User Manual

P4 titan ddr motherboard

Hide thumbs Also See for GA-8IRX:

Table of Contents

This Manual: http://www.manuallib.com/file/2597558

Step 1-2 : CPU Heat Sink Installation

1. Hook one end of the cooler

bracket to the C PU socket first.

? Please use Intel approved cooling fan.

? We recommend you to apply the thermal tape to provide better heat conduction between

your CPU and heatsink.

(The CPU cooling fan might stick to the CPU due to the hardening of the thermal paste.

During this condition if you try to remove the cooling fan, you might pull the processor out

of the CPU socket alone with the cooling fan, and might damage the processor. To avoid

this from happening, we suggest you to either use thermal tape instead of thermal paste, or

remove the cooling fan with extreme caution.)

? Make sure the CPU fan power cable is plugged in to the CPU fan connector, this completes

the installation.

? Please refer to CPU heat sink user's manual for more detail installationprocedure.

2. Hook the other end of the

cooler bracket to the CPU

socket.

- 9 -

Hardware Installation Process

Table of Contents