Interior Lamps
Courtesy lamps
1. To remove it, pry the opposite side
of the lamp switch using a flat-blade
screwdriver. (Be careful not to make
scratches.)
2. Remove the bulb.
3. Replace the bulb.
4. Reinstall the lamp assembly.
ELECTRICAL SYSTEM
Fuses
Data on the replacement fuse must
match the data on the defective fuse.
Before replacing a fuse, turn off the
respective switch and the ignition.
A blown fuse can be recognised by its
melted wire (as shown below). Do not
replace the fuse until the cause of the
fault has been remedied. Seek the
assistance of
your
CHEVROLET
retailer for service.
Some functions are protected by several
fuses.
Fuses may also be inserted without
existence of a function.
Vehicle Care
Fuse Extractor
A fuse extractor may be located in the
fuse box in the engine compartment.
Place the fuse extractor on the various
types of fuse from the top or side, and
withdraw fuse.
121