Sata Settings Details - Dell PowerEdge T130 Owner's Manual

Option Description
Number of Cores Controls the number of enabled cores in each processor. This option is set to All
per Processor by default.
Processor 64-bit Specifies if the processor(s) support 64-bit extensions.
Support
Processor Core Specifies the maximum core frequency of the processor.
Speed
Processor 1
The following settings are displayed for each processor installed in the system:
Option
Family-Model-
Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores

SATA Settings details

The SATA Settings screen details are explained as follows:
Option Description
Embedded SATA Enables the embedded SATA option to be set to Off, , AHCI, or RAID modes. This
option is set to AHCI by default.
Security Freeze Sends Security Freeze Lock command to the Embedded SATA drives during POST.
Lock This option is applicable only for AHCI mode.
Write Cache Enables or disables the command for Embedded SATA drives during POST.
Port A
For AHCI or RAID mode, BIOS support is always enabled.
Option
Model
Drive Type
Capacity
Port B
For AHCI or RAID mode, BIOS support is always enabled.
Option
Model
Drive Type
24
Description
Specifies the family, model, and stepping of the processor
as defined by Intel.
Specifies the brand name.
Specifies the total L2 cache.
Specifies the total L3 cache.
Specifies the number of cores per processor.
Description
Specifies the drive model of the selected device.
Specifies the type of drive attached to the SATA port.
Specifies the total capacity of the hard drive. This field is
undefined for removable media devices such as optical
drives.
Description
Specifies the drive model of the selected device.
Specifies the type of drive attached to the SATA port.