Next steps
1.
Place the system upright on its feet on a flat and stable surface.
2.
Reconnect the peripherals and connect the system to the electrical outlet
3.
Turn the system on, including any attached peripherals.
Bezel
Removing the bezel
Prerequisites
1.
Ensure that you follow the
2.
Follow the procedure listed in
Steps
1.
Lift the retention clips at the edge of the bezel.
2.
Lift the bezel and pull it away from the system.
Figure 6. Removing and installing the bezel
1.
retention clips (4)
Next steps
1.
Install the bezel.
2.
Follow the procedure listed in
40
Safety
instructions.
Before working inside your
After working inside your
system.
2.
bezel
system.