Horizontal Left With Right Vent - Rheem 96v series Installation Instructions Manual

HORIZONTAL LEFT / RIGHT VENT
HORIZONTAL LEFT / RIGHT VENT HORIZONTAL LEFT / RIGHT VENT
AIRFL OW
PARTS NEEDED: PARTS NEEDED:
FROM PARTS BAG
(PROVIDED WITH UNIT)
INTAKE INTAKE AIR INTAKE AIR
COUPLING DIFFUSER DIFFUSER
AND NUT
FROM CONVERSION KIT RXGY-ZK FROM CONVERSION KIT RXGY-ZK
(X10)
#8 X 1/2"
SCREW
TOOLS/MATERIALS NEEDED: TOOLS/MATERIALS NEEDED: TOOLS/MATERIALS NEEDED:
ELECTRIC DRILL ELECTRIC DRILL ELECTRIC DRILL ELECTRIC DRILL ELECTRIC DRILL
PVC GLUE AND PRIMER PVC GLUE AND PRIMER PVC GLUE AND PRIMER PVC GLUE AND PRIMER
NOTE: THESE CONVERSION INSTRUCTIONS ARE INTENTIONALLY GENERIC, SOME PARTS MAY BE DIFFERENT IN YOUR FURNACE. NOTE: THESE CONVERSION INSTRUCTIONS ARE INTENTIONALLY GENERIC, SOME PARTS MAY BE DIFFERENT IN YOUR FURNACE. NOTE: THESE CONVERSION INSTRUCTIONS ARE INTENTIONALLY GENERIC, SOME PARTS MAY BE DIFFERENT IN YOUR FURNACE. NOTE: THESE CONVERSION INSTRUCTIONS ARE INTENTIONALLY GENERIC, SOME PARTS MAY BE DIFFERENT IN YOUR FURNACE. NOTE: THESE CONVERSION INSTRUCTIONS ARE INTENTIONALLY GENERIC, SOME PARTS MAY BE DIFFERENT IN YOUR FURNACE.
NOTE: STEPS 1- 4 SHOWN WITH FURNACE IN "AS SHIPPED CONDITION" NOTE: STEPS 1- 4 SHOWN WITH FURNACE IN "AS SHIPPED CONDITION" NOTE: STEPS 1- 4 SHOWN WITH FURNACE IN "AS SHIPPED CONDITION"
TRANSITION TRANSITION
1
(DISCARD)
1a
1b
1a - REMOVE ELBOW, (2) COUPLINGS, AND FLUE TRANSITION. 1a - REMOVE ELBOW, (2) COUPLINGS, AND FLUE TRANSITION. 1a - REMOVE ELBOW, (2) COUPLINGS, AND FLUE TRANSITION.
NOTE:RETAIN ELBOW AND COUPLINGS FOR LATER USE. NOTE:RETAIN ELBOW AND COUPLINGS FOR LATER USE. NOTE:RETAIN ELBOW AND COUPLINGS FOR LATER USE.
1b - REMOVE TRAP AND HOSES. RETAIN HOSE D FOR LATER USE. 1b - REMOVE TRAP AND HOSES. RETAIN HOSE D FOR LATER USE. 1b - REMOVE TRAP AND HOSES. RETAIN HOSE D FOR LATER USE.
NOTE: TO REMOVE TRAP REMOVE (2) SCREWS AND PULL NOTE: TO REMOVE TRAP REMOVE (2) SCREWS AND PULL NOTE: TO REMOVE TRAP REMOVE (2) SCREWS AND PULL
STRAIGHT OUT
34
PARTS NEEDED FOR THIS CONVERSION REQUIRE ITEMS PARTS NEEDED FOR THIS CONVERSION REQUIRE ITEMS PARTS NEEDED FOR THIS CONVERSION REQUIRE ITEMS
!
FROM THE PARTS BAG, CONVERSION KIT RXGY-CK
YOU MUST HAVE THE PARTS OUTLINED BELOW FROM THESE KITS YOU MUST HAVE THE PARTS OUTLINED BELOW FROM THESE KITS YOU MUST HAVE THE PARTS OUTLINED BELOW FROM THESE KITS
BEFORE PROCEEDING. BEFORE PROCEEDING.
FROM CONVERSION KIT RXGY-CK FROM CONVERSION KIT RXGY-CK
2-5/8"
2-5/8" FLUSH
MOUNT PLUG MOUNT PLUG
(X2)
PIPE COLLAR / GASKET
ASSEMBLY
1/8" DRILL BIT 1/8" DRILL BIT 1/8" DRILL BIT 1/8" DRILL BIT 1/8" DRILL BIT 3/16" DRILL BIT 3/16" DRILL BIT 3/16" DRILL BIT 3/16" DRILL BIT 3/16" DRILL BIT
HAMMER HAMMER HAMMER HAMMER FLAT HEAD SCREWDRIVER FLAT HEAD SCREWDRIVER FLAT HEAD SCREWDRIVER FLAT HEAD SCREWDRIVER
TRANSITION TRANSITION TRANSITION TRANSITION
COUPLING COUPLING
(RETAIN) (RETAIN)
ELBOW ELBOW
(RETAIN) (RETAIN)
IDB COUPLING IDB COUPLING
(RETAIN) (RETAIN)
HOSE "D" HOSE "D" HOSE "D" HOSE "D"
(RETAIN) (RETAIN)
VENT HOSE VENT HOSE
(DISCARD) (DISCARD)
RXGY-CK AND RXGY-ZK.
(X4)
#8 X 1/2" 1/4" BLACK .559" CONDENSATE
SCREW TRAP DRAIN PLUG
VENT TUBE
1/2" DRAIN
HOSE G
PLIERS PLIERS PLIERS PLIERS PLIERS 1/4" HEX HEAD DRIVER 1/4" HEX HEAD DRIVER 1/4" HEX HEAD DRIVER 1/4" HEX HEAD DRIVER 1/4" HEX HEAD DRIVER
TUBING CUTTER TUBING CUTTER TUBING CUTTER TUBING CUTTER
2
INSTALL
2a
2-5/8"
2d
DISCARD
2b
2a - INSTALL 2-5/8" FLUSH MOUNT PLUG. 2a - INSTALL 2-5/8" FLUSH MOUNT PLUG.
2b - REMOVE LEFT 2-3/8" FLUSH PLUG IN BLOWER SHELF - DISCARD. 2b - REMOVE LEFT 2-3/8" FLUSH PLUG IN BLOWER SHELF - DISCARD. 2b - REMOVE LEFT 2-3/8" FLUSH PLUG IN BLOWER SHELF - DISCARD.
2c - RELOCATE RIGHT 2-3/8" FLUSH MOUNT PLUG FROM 2c - RELOCATE RIGHT 2-3/8" FLUSH MOUNT PLUG FROM 2c - RELOCATE RIGHT 2-3/8" FLUSH MOUNT PLUG FROM
BLOWER SHELF TO TOP PLATE. BLOWER SHELF TO TOP PLATE.
2d - RELOCATE Ø.403" DRAIN PLUG IN THE COLLECTOR BOX. 2d - RELOCATE Ø.403" DRAIN PLUG IN THE COLLECTOR BOX. 2d - RELOCATE Ø.403" DRAIN PLUG IN THE COLLECTOR BOX.
2e - REMOVE RECTANGLE FLUSH MOUNT PLUG-DISCARD 2e - REMOVE RECTANGLE FLUSH MOUNT PLUG-DISCARD 2e - REMOVE RECTANGLE FLUSH MOUNT PLUG-DISCARD
1/2" DRAIN 1/2" DRAIN
HOSE E HOSE E
FLUE PIPE
INTAKE
ASSEMBLY ASSEMBLY
PIPE
W/ O-RING W/ O-RING
5/16 HEX HEAD DRIVER 5/16 HEX HEAD DRIVER 5/16 HEX HEAD DRIVER 5/16 HEX HEAD DRIVER 5/16 HEX HEAD DRIVER
2e
1/2" VINYL
CAP (YELLOW)
O-RING
2c
ST-A1194-34-01