Table of Contents
Advertisement
1.4
Environmental limits
Instructions regarding transport, storage, installation and use of the drive must be complied with,
including the specified environmental limits. These instructions can be found in the relevant drive
documentation. Drives must not be subjected to excessive physical force.
1.5
Access
Drive access must be restricted to authorized personnel only. Safety regulations which apply at the
place of use must be complied with.
1.6
Compliance with regulations
The installer is responsible for complying with all relevant regulations, such as national wiring
regulations, accident prevention regulations and electromagnetic compatibility (EMC) regulations.
Particular attention must be given to the cross-sectional areas of conductors, the selection of fuses
or other protection, and protective ground (earth) connections.
Instructions for achieving compliance with specific EMC standards may be found in the relevant
drive documentation.
Within the European Union, all machinery in which this product is used must comply with the
following directives:
2006/42/EC: Safety of machinery.
2004/108/EC: Electromagnetic Compatibility.
1.7
Adjusting parameters
Some parameters have a profound effect on the operation of the drive. They must not be altered
without careful consideration of the impact on the controlled system. Measures must be taken to
prevent unwanted changes due to error or tampering.
1.8
Stored charge
The drive contains capacitors which remain charged to a potentially lethal voltage after the AC
supply has been disconnected. If the drive has been energized, the AC supply must be isolated for
at least ten minutes before work may continue.
6
MCi210 User Guide
Issue Number: 2
Hide quick links:
Advertisement
Table of Contents
