FujiFilm X-T2 Owner's Manual page 285

Setting Setting
D
Flash compen-
sation/output
(group A)
E
Flash compen-
sation/output
(group B)
F
Flash compen-
sation/output
(group C)
G
Flash mode
(TTL)
Adjust fl ash level for the selected group according
to option selected for fl ash control mode. Note
that the full value may not be applied if the limits
of the fl ash control system are exceeded.
•
TTL: Adjust fl ash compensation.
•
M/MULTI: Adjust fl ash output.
•
TTL%: Choose the balance between groups A and
B and adjust overall fl ash compensation.
Choose a fl ash mode for TTL fl ash control:
•
FLASH AUTO: The fl ash fi res only as required; fl ash
level is adjusted according to subject brightness.
A p icon displayed when the shutter button is
pressed halfway indicates that the fl ash will fi re
when the photo is taken.
•
STANDARD: The fl ash fi res with every shot if pos-
sible; fl ash level is adjusted according to sub-
ject brightness. The fl ash will not fi re if not fully
charged when the shutter is released.
•
SLOW SYNC.: Combine the fl ash with slow shutter
speeds when photographing portrait subjects
against a backdrop of night scenery. The fl ash
will not fi re if not fully charged when the shutter
is released.
External Flash Units
Description Description
10
265