Advertisement
Accessories
Water filters (refer to form# 6380, 9905, 6070)
Nu-Calgon IMS-III sanitizer, 16 oz bottle (item# 00979674)
SafeCLEAN
environmentally responsible ice machine cleaner
™
(item# 00132001)
Wall mount bracket (see accessory form# 3311)
Slide-out track accessory – allows RIDE model ice machines to slide-
out without disconnecting utilities (see form# 3311)
Ice machine stand, height-adjustable (see form# 3311)
Longer ice transport tube (10'/3 m is standard) – Specify length:
____ ft/m in 5'/1.5 m increments (20' max)
Specification
W1 Width
Depth
H1 Height
Service clearance
C1 Electrical
115 V/60/1 – MCD425 models
C2 Ice transport tube
C3 Water inlet
C4 Drain
Water-cooled ice machine
connections
Air temperature
Water temperature
Potable water pressure
Condenser water pressure
Ice production at 70 F (21 C) air,
50 F (10 C) water
Ice production at 90 F (32 C) air,
70 F (21 C) water
Energy consumption
90 F (32 C) air,
70 F (21 C) water
Heat rejection
Water consumption
Water flow requirement for
water-cooled models
Approximate ship weight
NOTE: For indoor use only
SHORT FORM SPECIFICATION:
________________ [ condenser type, from model number guide] capable of producing
compressed nugget ice using an efficient, sanitary vertical evaporator/auger system
and delivering ice by a flexible wire reinforced, transport tube to
ice and beverage dispenser and provided with a stainless steel frame, plus all the
features listed and mounting/performance-enhancing accessories checked above. Ice
machine to be equipped with automatic self-flushing.
2
Form# 6695
18.80" (47.8 cm)
D1 air-cooled – 22.09" (56.1 cm)
D2 water-cooled – 20.00" (50.8 cm)
17.10" (43.4 cm)
12.00" (30.5 cm) top –
no front obstructions
6.00" (15.24 cm) on exhaust side
(left, right and rear)
11 amps, 0.8 kW, requires dedicated
15 amp circuit,
7' (2 m) cord, NEMA 5-15 plug
see page 7 for details
3/8" FPT
3/4" MPT
water-cooled models require
separate condenser drains
C5 – 3/8" FPT condenser inlet
C6 – 3/8" FPT condenser drain
50 - 100 F (10 - 38 C)
45 - 90 F (10 - 32 C)
10 - 70 psi (69 - 483 kPa)
10 - 125 psi (69 - 861 kPa)
air-cooled models – 425 lb (193.0 kg)
water-cooled models – 443 lb (201.1 kg)
air-cooled models – 325 lb (147.6 kg)
water-cooled models – 372 lb (169.0 kg)
air-cooled models – 5.4 kWh
water-cooled models – 5.0 kWh
per 100 lb (45.4 kg) ice
air-cooled models – 5,000 BTU/hr
water-cooled models – 1,400 BTU/ hr
to air, 3,600 BTU/hr to water
12.0 gal (45.4 L) of potable water
per 100 lb (45.4 kg) of ice
0.25 gpm at 50 F (10 C)
0.5 gpm at 70 F (21 C)
1.25 gpm at 90 F (32 C)
160 lb (73 kg)
Ice machine to be a Follett® model number
ice storage bin, or
Dimensional drawing
C2
H1
W1
Front view — air-cooled, RIDE models
W1
C3
C4
2.50" (6.35 cm)
Front view — water-cooled models
W1
C5
C6
C3
C4
10.62" (26.97 cm)
Side view — air-cooled and water-cooled models
D1
D2
air-cooled RIDE models only
Self-contained 425 series RIDE ice machine
D2
D1
C1
4.75" (12.07 cm)
2.25" (5.71 cm)
C1
5.25"
4.75"
(13.35 cm)
(12.07 cm)
2.25"
(7.72 cm)
2.50" (6.35 cm)
8.25" (20.96 cm)
Advertisement
