Pioneer MVH-290BT Owner's Manual page 9

C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
PioneerTest.book Page 9 Wednesday, May 11, 2016 9:52 AM
To answer an incoming call
1
Press when a call is received.
Basic operations
Purpose Operation
End a call Press
Reject an incoming call Press and hold
Switch between the current Press the M.C. dial.
caller and a caller on hold
Cancel a caller on hold Press and hold
Adjust the volume of the Turn the M.C. dial during the call.
caller's voice (When private
mode is on, this function is not
available.)
Turn the private mode on or Press BAND/
off
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (1/
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/
to 6/ ), then press the M.C. dial.
.
when a call is received.
.
during the call.
to 6/ ).
Phone menu
Menu Item Description
RECENTS Display the missed call history.
[MISSED]
[DIALED] Display the dialed call history.
[RECEIVED] Display the received call history.
PHONE BOOK*1 Display the contacts which have been transferred from
your phone. Set [VISIBLE] in the Bluetooth settings to
[ON] to browse the contacts via this unit.
PRESET 1-6 Recall the preset phone numbers. You can also recall the
preset phone numbers by pressing one of the number
buttons (1/ to 6/
A.ANSR Select [ON] to answer an incoming call automatically.
[ON], [OFF]
R.TONE Select [ON] if the ring tone does not come out from the
car speakers. Depending on the connected phone, this
[ON], [OFF]
function may not work.
PB INVT Invert the order of names in the phone book (name
view).
PB A.SYNC Select whether or not to transfer the contacts from your
phone automatically when your phone is connected to
[ON], [OFF]
the unit.
• When connected for the first time, the contacts from
your phone are transferred automatically, regardless of
the [PB A.SYNC] setting.
• If you switch from [ON] to [OFF], the auto
synchronization will not be performed on the next
connection.
• If you switch from [OFF] to [ON], the auto
synchronization will be performed when your phone is
connected to the unit.
• During the auto synchronization, you cannot cancel
the synchronization, even if you select [OFF].
).
9
En
KM637
KM637_UC