Panasonic DMR-EZ49VEG Service Manual page 20

Error Code Diagnosis contents
NO READ Disc read error
HARD Drive error
ERR
SELF Restoration operation
CHECK
PLEASE Unit is in termination process Unit is in termination process now.
WAIT
UNFOR- Unformatted disc error
MAT
IR ERR IR communication error
No REC Recording is impossible
Description
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
The drive detected a hard error.
Since the power cord fell out during a
power failure or operation, it is under resto-
ration operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there
is the possibility that defective Digital P.C.B.
/ DVD drive.
"BYE" is displayed and power will be turned
off.
In case "Quick Start" of setup menu is ON,
it is displayed in restoration operation for
AC off.
You have inserted an unformatted DVD-
RAM or DVD-RW that is unformatted or
recorded on other equipment.
[IR ERR] is displayed when communication
between Timer microprocessor and IR
microprocessor fails.
[No REC] is displayed when recording is
impossible due to the defect, dirt or wound
of media.
20
Monitor Display Automatic FL display
"Cannot read.
Please check the
disc."
"DVD drive error." Display for 5 seconds.
The character indication flows side-
ways.
No display
The character indication flows side-
ways.
No display
The character indication flows side-
ways.
The character indication flows side-
ways.
No display
No display