Lexus NX 300H Owner's Manual page 61

■
AUTO CONNECTION MODE
To turn auto connection mode on, set
"Bluetooth* Power" to on. (P.64)
®
Leave the Bluetooth device in a loca-
tion where the connection can be estab-
lished.
 When the engine <power> switch is in
ACCESSORY or IGNITION ON <ON>
mode, the system searches for a nearby
registered device.
 The system will connect with the registered
device that was last connected, if it is
nearby.
■
CONNECTING MANUALLY
When the auto connection has failed or
"Bluetooth* Power" is turned off, it is
necessary to connect Bluetooth
ually.
1
Press the "MENU" button on the
Remote Touch and select "Setup".
2
Select "Bluetooth*".
3
Follow the steps in "CONNECTING A
®
Bluetooth DEVICE" from "STEP 2".
(P.60)
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
■ RECONNECTING THE Bluetooth
PHONE
If a Bluetooth
due to poor reception from the
®
Bluetooth
<power> switch is in ACCESSORY or
IGNITION ON <ON> mode, the sys-
tem automatically reconnects the
®
Bluetooth
®
man-
NX300h/NX200t_Navi_OM78105U_(U)
15.06.25 12:26
®
2. Bluetooth SETTINGS
®
phone is disconnected
network when the engine
phone.
®
2
61