Lexus NX 300H Owner's Manual page 260

1. VOICE COMMAND SYSTEM OPERATION
INFORMATION
If the navigation system does not respond
●
or the confirmation screen does not dis-
appear, press the talk switch and try
again.
If a voice command cannot be recog-
●
nized, voice guidance will say "Pardon?"
("Command not recognized. " will be dis-
played on the screen) and voice com-
mand reception will restart.
If a voice command cannot be recog-
●
nized 2 consecutive times, the voice
command guidance system will say
"Paused. To restart voice recognition,
please push the talk switch. To cancel
voice recognition, please push and hold
the talk switch. " Then voice recognition
will be suspended.
"Voice Recognition Prompts" can be set
●
to on or off on the "Voice Settings"
screen. (P.74)
Voice guidance can be canceled by set-
●
ting voice prompts to off. Use this setting
when it is desirable to say a command
immediately after pressing the talk switch
and hearing a beep.
260
■
DISPLAYING THE "Voice Settings"
SCREENS
 Selecting can be displayed the
"Voice Settings" screen. (P.73)
NX300h/NX200t_Navi_OM78105U_(U)
15.11.06 08:53