Bluetooth; Using The Display; Getting Connected - VocoPro Karaoke RockOnRoller Owner's Manual

Getting Connected

USING THE BLUETOOTH – ACCEPT AUDIO FROM AN EXTERNAL DEVICE:
• On the Karaoke RockOnRoller, push Mode to cycle through options to the Bluetooth input mode .
- The Karaoke RockOnRoller display will show a blinking red dot to indicate no connection .
• On the external device, search for Available Devices .
- On the list of Available Devices, select Karaoke RockOnRoller to connect .
• If done correctly, the Karaoke RockOnRoller display will show a solid blue dot to indicate a connection .
Under Display
USING THE BUILT - IN DISPLAY:
• On the Karaoke RockOnRoller, the display will only rotate clock-wise .
• Be careful not to close the display once it is rotated . It will be difficult to raise the display .
Red & Blinking =
NO CONNECTION
PLEASE NOTE:
• ONLY ROTATE SCREEN CLOCK-WISE
• ONLY ROTATE 270˚
• SCREEN CANNOT ROTATE FULL 360˚
• DO NOT FOLD SCREEN BACK DOWN
WITH SCREEN FACING UP. IT WILL BE
DIFFICULT TO FOLD UP SCREEN AGAIN.
10
Blue & Solid =
CONNECTED