Audio Adjustments; Introduction Of Audio Adjustments; Using Balance Adjustment - Pioneer AVH-P6500DVD Operation Manual

Section
15

Audio Adjustments

Introduction of audio
adjustments
1 Audio display
Shows the audio function names.
Important
If the multi-channel processor (DEQ-P7000) is
connected to this unit, the audio function will be
changed into the multi-channel processors
audio menu. For details, refer to Introduction of
DSP adjustments on page 74.
% Touch A.MENU and then touch AUDIO
to display the audio function names.
The audio function names are displayed and
operable ones are highlighted.
# When A.MENU is not displayed, you can dis-
play it by touching the screen.
# You can also display MENU by clicking the
joystick.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function
names, touch PREV.
# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to
BASS and TREBLE.
# Only when the subwoofer controller setting is
PREOUT FULL, NON FADING will be displayed
instead of SUB WOOFER. (Refer to Setting the
rear output and subwoofer controller on page 87.)
68
En
1
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Touch A.MENU and AUDIO and then
touch FAD/BAL.
# When the rear output setting is
REAR SP SUB. W, BALANCE will be displayed in-
stead of FAD/BAL. Refer to Setting the rear output
and subwoofer controller on page 87.
2 Touch a or b to adjust front/rear
speaker balance.
Each time you touch a or b moves the front/
rear speaker balance towards the front or the
rear.
FRONT:15  REAR:15 is displayed as the front/
rear speaker balance moves from front to rear.
# FR:00 is the proper setting when only two
speakers are used.
# When the rear output setting is
REAR SP SUB. W, you cannot adjust front/rear
speaker balance. Refer to Setting the rear output
and subwoofer controller on page 87.