Pioneer dvd player operating instructions (59 pages)
Summary of Contents for Pioneer AVX-P7650DVD
Page 1
AVX-P7650DVD This product conforms to new cord colors. Los colores de los cables de este producto se confor- man con un nuevo código de colores. As cores dos fios deste produto seguem um novo padrão de cores.
Connecting the Units ........ 1 Connecting the power cord ......3 CAUTION: When connecting with a Pioneer head unit ..5 • PIONEER does not recommend that When connecting with a car stereo you install or service your display your- with RCA audio input ........
Page 3
Note: • To prevent incorrect connection, the input side of the IP-BUS connector is blue, and the output side • This unit is for vehicles with a 12-volt battery and is black. Connect the connectors of the same col- negative grounding. Before installing it in a recre- ors correctly.
Connecting the Units Connecting the power cord This product Fuse resistor To electric terminal controlled by ignition switch (12 V DC) ON/OFF. Orange/white Fuse resistor To lighting switch terminal. Yellow Fuse holder To terminal always supplied with power regardless of ignition switch position.
Page 5
WARNING LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE. Connection method Clamp the lead.
Connecting the Units When connecting with a Pioneer head unit Head unit (sold separately) To IP-BUS input (Blue) Blue 40 cm AV-BUS input (Blue) IP-BUS input (Blue) Blue 15 cm Blue This product IP-BUS cable Multi-CD player (sold separately) Black...
When connecting with a car stereo with RCA audio input 40 cm AV-BUS input (Blue) IP-BUS input (Blue) Blue 15 cm Blue This product RCA cable (sold separately) 15 cm Audio output (AUDIO OUTPUT) When connecting with a car Car stereo with stereo with FM reception RCA input capability, use a FM modulator...
Connecting the Units When connecting with a multi-channel processor RCA cable (supplied with multi-channel processor controller) Car stereo with RCA output IP-BUS cable (supplied with multi-channel processor) Multi-channel processor controller (e.g. AXM-P7650) (sold separately) Blue Multi-channel processor (e.g. DEQ-P7650) (sold separately) RCA cable (supplied with multi-channel processor) Black...
When connecting with a rear view camera When using this product with a rear view camera, automatic switching to video from a rear view camera when the gear shift is moved to REVERSE (R) position is possible. WARNING: • USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.
Page 10
Connecting the Units This product CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise screen image may appear reversed. RCA cable (sold separately) 20 cm Rear view camera To video output Video input 2 (VIDEO 2/BACK CAMERA INPUT)
When connecting the external video component and the display This product RCA cables 28 cm (sold separately) Video input 1 (VIDEO 1 INPUT) To video output External video component (sold separately) Audio input 1 To audio outputs (AUDIO 1 INPUT) Video input 2 (VIDEO 2/BACK CAMERA INPUT) Audio input 2...
Installation Note: Installing the remote control unit • Before finally installing the unit, connect the When not using the remote control wiring temporarily, making sure it is all connect- ed up properly, and the unit and the system work unit, secure it with velcro tape to pre- properly.
DIN Front/Rear-mount This unit can be properly installed either from “Front” (conventional DIN Front-mount) or “Rear” (DIN Rear- mount installation, utilizing threaded screw holes at the sides of unit chas- sis). For details, refer to the following illustrated installation methods. Conceal tape Before installing the unit Side bracket...
ADD-ON mode (M). Switch the mode according to the combined compo- nents. • IP-BUS mode (S) – Using with a Pioneer head unit featuring an IP- BUS input or multi-channel proces- sor control unit • ADD-ON mode (M) – Using with a...
Page 16
Conexión de las unidades ......1 Conexión del cable de alimentación ....3 PRECAUCIÓN: Cuando conecte con una unidad principal • PIONEER no recomienda que sea usted Pioneer ............5 mismo quien instale o revise su pantalla. Cuando conecte con un autoestéreo con La instalación o revisión del producto...
Page 17
Nota: • Para evitar la conexión incorrecta, el lado de en- trada del conector IP-BUS es azul, y el lado de • Esta unidad es para vehículos con batería de 12 salida es negro. Conecte los conectores del mismo voltios y con conexión a tierra. Antes de instalar color correctamente.
Page 18
Conexión de las unidades Conexión del cable de alimentación Este producto Rojo Resistencia Al terminal de energía eléctrica controlado de fusible por el interruptor de encendido del vehículo (12 V de CC.) ON/OFF. Anaranjado/blanco Resistencia Al terminal de interruptor de de fusible iluminación.
Page 19
ADVERTENCIA EL CABLE VERDE CLARO DEL CONECTOR DE ALIMENTACIÓN ESTÁ DISEÑADO PARA DETECTAR SI EL VEHÍCULO ESTÁ ESTACIONADO Y DEBE CONECTARSE CON EL LADO DE LA FUENTE DE ALIMENTACIÓN DEL INTERRUPTOR DEL FRENO DE MANO. LA CONEXIÓN O EL USO INCORRECTO DE ESTE CABLE PUEDE INFRINGIR LAS LEYES PERTINENTES Y OCASIONAR LESIONES FÍSICAS O DAÑOVES.
Page 20
Conexión de las unidades Cuando conecte con una unidad principal Pioneer Unidad principal (vendida separadamente) A la entrada IP-BUS (Azul) Azul 40 cm Entrada AV-BUS (Azul) Entrada IP-BUS (Azul) Azul 15 cm Azul Este producto Cable IP-BUS Reproductor de Multi-CD (vendido...