Modifying A Mac Filter Policy - Alcatel-Lucent 7210 SAS Configuration Manual

Modifying a MAC Filter Policy

To access a specific MAC filter, you must specify the filter ID. Use the
to remove the command parameters or return the parameter to the default setting.
Example
The following output displays the modified MAC filter output:
A:ALA-7>config>filter# info
----------------------------------------------
...
...
----------------------------------------------
A:ALA-7>config>filter#
7210 SAS D, E OS Router Configuration Guide
:
config>filter# mac-filter 90
config>filter>mac-filter# description "New filter info"
config>filter>mac-filter# entry 1
config>filter>mac-filter>entry# description "New entry info"
config>filter>mac-filter>entry# action forward
config>filter>mac-filter>entry# exit
config>filter>mac-filter# entry 2 create
config>filter>mac-filter>entry$ action drop
config>filter>mac-filter>entry# match
config>filter>mac-filter>entry>match# dot1p 7 7
mac-filter 90 create
description "New filter info"
scope exclusive
entry 1 create
description "New entry info"
match
src-mac 00:dc:98:1d:00:00 ff:ff:ff:ff:ff:ff
dst-mac 02:dc:98:1d:00:01 ff:ff:ff:ff:ff:ff
exit
action forward
exit
entry 2 create
match
dot1p 7 7
exit
action drop
exit
exit
Filter Policies
form of the command
no
Page 89