Panasonic CF-07 Series Operating Instructions Manual page 9

Saving Data on the Hard Disk
Do not expose your computer to shock.
Use care when handling your computer, shock may damage your hard disk or make
your software applications and data unusable.
Do not power off your computer while software applications are running or hard disk
drive indicator ( ) is on.
Properly shut Windows* down to avoid problems ([Start] - [Turn Off Computer]).
Save all valuable data to disks.
Backing up data to disks will limit damage should trouble occur to your computer or
should you inadvertently change or erase data.
Use the security function for all important data. (
* This computer uses Microsoft
Hard Disk Lock
When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the
hard disk when the hard disk is installed in a different computer, since a password is also
set for the hard disk. When the hard disk is returned to the original computer, you can read/
write data as before. In this case, however, make the settings in the Setup Utility exactly
the same as they were before the hard disk was removed. (Note that this Hard Disk Lock
does not guarantee the complete protection of data.) (
Saving Data on Floppy Disks
Do not power down your computer or press the floppy disk drive eject button
while the floppy disk drive indicator is on.
Doing so may damage the data on the floppy disk and render the floppy disk useless.
Use care when handling floppy disks.
To protect the data on your floppy disks or to prevent a floppy disk from becoming
stuck in your computer, avoid the following:
• Sliding the shutter on the floppy disk manually.
• Exposing the floppy disk to a magnetic field.
• Storing the floppy disk in locations prone to high temperatures, low pitched noise,
dampness, or dust.
• Applying more than one label on the floppy disk.
Confirm the contents of a floppy disk before formatting it.
Confirm that no important data is on the floppy disk, because all data on the floppy disk
will be erased.
Use the write-protect tab.
This is a must for preserving
important data.
This prevents your data from
being erased or overwritten.
Windows XP Professional.
® ®
Write Enable
"Security Measures")
"Security Measures")
Write-protect Tab
Write Disable
9