Panasonic CF-07 Series Operating Instructions Manual page 33

Others
No response
Unable to install
Press Ctrl + Shift + Esc to open Task Manager and
close the software application which is not responding.
After shutting down by pressing the power switch for more
than four seconds, press the power switch to power on
and open the application again.
If the program no longer works normally, Select [Start] -
[Control Panel] - [Add or Remove Programs] to delete
the program using the following procedure. Then rein-
stall the program.
Install the software after powering off the computer and the
wireless display and then connecting the port replicator, op-
tional USB floppy disk drive, external keyboard and exter-
nal display.
33