Start Your Installation
Please follow these instructions so that you can hook up the cables to associated connectors.
1. Lay the display flat on an even surface as seen in the step 1 diagram.
2. Connect the DP, Power, and USB cables as seen in step 2 diagram.
Connect RJ45 to RJ45 Cable if remote control is required. (Optional)
3. Connect the cables to the appropriate connectors as seen in the step 3 diagram.
Step 1
Step 2
DP
RJ45 IN (Optional)
Power
USB
RJ45 OUT (Optional)
Step 3
Power
Audio-Out
Audio-In
USB
VGA
RJ45 OUT
DVI
RJ45 IN
HDMI
DP
7