Connect Or Disconnect A Paired Headset; Deleting A Headset From The Paired List - LG-Nortel IP8840 User Manual

5.10.2. Connect or Disconnect a Paired Headset

When one or more headsets are paired with the IP8840 phone, the headset must be connected,
(activated) prior to use. When it is desired to change the active headset, the presently active headset
must be disconnected (deactivated) prior to connecting the new headset. The following procedure
describes the steps required to connect or disconnect a headset that is already paired to the IP Phone.
To connect to a headset that is already paired or, to disconnect an active headset:
Press the Settings (
o
Dial 3, or move the cursor to
o
OK
softkey.
Dial 11, or move the cursor to
o
softkey.
Dial 1, or move the cursor to
o
Previous-Next
using the
softkey. This displays a list of previously paired headsets.
Select a Bluetooth headset from the list of paired headsets
o
Next
using the softkeys. An asterisk,
of the current headset selection.
Use the right navigation button to locate and select the
o
Connect softkey to activate the headset or the
softkey to deactivate the active headset. The LCD will
display the connected or disconnected message for about
3 seconds.
Move to another parameter with the navigation buttons and
o
continue the session or press the Settings (
exit the configuration session.

5.10.3. Deleting a Headset from the Paired List

A Bluetooth headset can be removed from the Paired list. This is useful when five headsets are already
paired and a new headset must be paired with your IP8840.
To remove a headset from the Paired list:
Press the Settings (
o
Dial 3, or move the cursor to
o
OK
softkey.
) button.
3.Phone Settings
11.Bluetooth
using the
1.Headset Management
softkeys, and press the
, displays in front
) button.
3.Phone Settings
24
IP8840 Broadworks IP Phone
Previous-Next
using the
Previous-Next
OK
Paired Headset List
*Wireless Headset(00:1A:12:34:56:78)
Add
Disconn
Paired Headset List
Wireless Headset(00:1A:22:16:78:34)
Connect
Headset is connected
) button to
Previous-Next
using the
User Guide
softkeys, and press the
softkeys, and press the
Next
Delete
08:30
softkeys, and press the
Dec. '08
OK
08:30
08:30