Pairing A Bluetooth Headset; Connect Or Disconnect A Paired Headset - LG-Nortel IP8830 User Manual

5.10.1. Pairing a Bluetooth headset

A Bluetooth headset must be paired with the IP8830 Bluetooth module before it can be connected
(activated). Up to five (5) headsets may be paired with the IP Phone at one time. Note that only one may
be active at a time.
To pair and connect a new headset with the IP Phone:
Press the Settings (
o
Dial 3, or move the cursor to
o
OK
softkey.
Dial 11, or move the cursor to
o
softkey.
Dial 1, or move the cursor to
o
Previous-Next
using the
softkey. This will display a list of paired headsets.
If no headsets are paired with the IP Phone, press the
o
Search softkey, the IP Phone will search for nearby
Bluetooth headsets. If one or more Bluetooth headsets are
already paired with the IP Phone, press the right navigation
button and select the
Select a Bluetooth headset from the list of headsets using
o
Next
the softkey, and select the
When the "Enter PIN Code" message displays, input the
o
PIN associated with the headset and press
valid PIN is entered, the headset is automatically activated
for use with your IP8830 phone.
Move to another parameter with the navigation buttons and continue the session or press the
o
Settings ( ) button to exit the configuration session.

5.10.2. Connect or Disconnect a Paired Headset

When one or more headsets are paired with the IP8830 phone, the headset must be connected
(activated) prior to use. When it is desired to change the active headset, the presently active headset
must be disconnected (deactivated) prior to connecting the new headset. The following procedure
describes the steps required to connect or disconnect a headset that is already paired to the IP Phone.
To connect a paired headset or disconnect an active headset:
Press the Settings (
o
Dial 3, or move the cursor to
o
OK
softkey.
Dial 11, or move the cursor to
o
softkey.
) button.
3.Phone Settings
11.Bluetooth
1.Headset Management
softkeys, and press the
Add softkey to add another headset.
Pair softkey.
OK
) button.
3.Phone Settings
11.Bluetooth
21
IP8830 Broadworks IP Phone
Previous-Next
using the
Previous-Next
using the
OK
Paired Headset List
*Wireless Headset (00:1A:34:56:78:AB)
No Paired Headset
Search
Searched Headset List
Wireless Headset(00:1A:34:5678:AB)
Search
softkey. If a
Enter PIN Code
Previous-Next
using the
Previous-Next
using the
User Guide
softkeys, and press the
softkeys, and press the
Add Next Delete
Next Pair
Clear OK
softkeys, and press the
softkeys, and press the
OK
08:30
08:30
08:30
08:30
OK
Dec. '08