Marantz SR6011 Owner's Manual page 180

Contents Connections
Audyssey ®
Set Audyssey MultEQ XT32, Audyssey Dynamic EQ
®
Dynamic Volume and Audyssey LFC™. These can be selected after
®
Audyssey ® Setup has been performed.
For additional information on Audyssey technology, please see
"Explanation of terms" (v p. 291).
0 "MultEQ ® XT32", "Dynamic EQ", "Reference Level Offset", "Dynamic Volume",
"Audyssey LFC™" and "Containment Amount" settings are stored for each input
source.
0 When the sound mode is in the "Direct" or "Pure Direct" mode, "MultEQ
"Dynamic EQ" and "Dynamic Volume" settings cannot be configured.
0 This cannot be set when the input mode is set to "7.1CH IN".
Front panel Display
Playback Settings
o MultEQ
MultEQ
, Audyssey
®
characteristics of the listening area based on Audyssey
measurement results. Selection is done from three types of
compensation curves. We recommend the "Reference" setting.
Reference
(Default):
L/R Bypass:
® XT32",
Flat:
Off:
0 When using headphones, "MultEQ
180
Rear panel
Tips
® XT32
® XT32 compensates for both time and frequency
Selects the default calibrated setting with
a slight roll off at high frequencies, which
is optimized for movies.
Selects the reference setting, but
bypasses MultEQ
and right speakers.
Selects the calibrated setting which is
optimized for small rooms where your
listening position is closer to the
speakers.
Do not use "MultEQ
® XT32" is automatically set to "Off".
Remote Index
Appendix
® Setup
® XT32 on the front left
XT32".
®