Removing And Replacing The Daughter Board - Motorola MOTOROKR E8 Service Manual

Disassembly

Removing and Replacing the Daughter Board

42
20. Insert the side dome flex into the slot on the side of the phone chassis.
21. Carefully attach the coaxial cable tool to end of the coaxial cable.
22. Use the coaxial cable tool to attach the cable to the cable connector on the
daughter board.
23. Carefully remove the coaxial cable tool from the coaxial cable.
24. Use the disassembly tool to attach the coaxial cable to the C clip.
25. Dress the coaxial cable so it does not obstruct the ribs or the screw boss.
1. Insert the disassembly tool under the UI flex and twist the tool to separate the
UI flex from the daughter board.
UI Flex
Figure 39. Separating the UI Flex From the Daughter Board
October 23, 2007
MOTOROKR E8
v511947
6809517A42-O