Chapter 5 - Troubleshooting; Cannot Connect To The Internet Over A Wired Connection; Cannot Access Settings - Buffalo AirStation WHR-300HP2 User Manual

Chapter 5 - Troubleshooting

Cannot Connect to the Internet Over a Wired Connection

• Make sure that your AirStation is plugged in!
• Check that the status LEDs of your AirStation are lit as below:
Power/Diag: LED is lit green
Wireless: LED is lit green or amber
• Make sure that your computer is configured to "obtain an IP address automatically from DHCP".
• Restart your AirStation.

Cannot Access Settings

• See chapter 3 for instructions to open Settings.
• Enter the correct username and password to log in to Settings. If you are using AirStation with factory default
settings, enter "admin" for the username and "password" for the password.
• Verify that your web browser is not set to use proxies.
• Make sure that your computer is configured to "obtain an IP address automatically from DHCP".
• Restart your AirStation.
57