BT response 75 User Manual page 12

Please note
If you alter the volume during playback
of a message, the beep does not sound
but the volume will change accordingly.
If the volume is below mid-volume,
it will automatically return to the
mid-volume setting when any buttons
are pressed (for example, if a message is
played back). The volume is unaffected
during remote access or call screening.
To set the time and day
Your BT Response 75 will
store the day and time an
incoming message or memo
was recorded. The BT
Response 75 uses the 12 hour
clock.
To check the time:
Press and release the Time
Time
button, your BT Response 75
will announce the day and time
in hours and minutes.
To set the time:
Press and hold down the
Time
Time button, your BT
Response 75 announces the
current day setting.
Skip
Whilst holding down the
TIME button, press the Skip
Skip
or Skip buttons to select the
correct day.
When the day setting you
require is announced, release
the Time button.
10
BT Response 75 – Issue 2 – Edition 1 – 7/10/03
Press and hold down the
Time Time button, your BT
Response 75 announces the
current hour setting.
Whilst holding down the
Skip
Time button, press the Skip
or Skip buttons to select the
Skip
correct hour.
Press and hold the Skip
Skip
Skip buttons to move rapidly
Skip
through the hour settings.
When the hour setting you
require is announced, release
the Time button.
Press and hold down the
Time button, your BT
Time
Response 75 announces the
current minute setting.
Whilst holding down the
Skip
Time button, press the Skip
or Skip buttons to select the
Skip
correct minutes.
Press and hold the Skip
Skip
Skip buttons to move rapidly
Skip
through the minute settings.
When the minute setting you
require is announced, release
the Time button.
Your BT Response 75 will
announce the full day and time.
Please note
The time on your BT Response 75 is
announced using the 12-hour clock.
Be sure to hold down the
long enough for your machine to say
whether it is am or pm.
or
or
or buttons