Erasing A Photo Right After Recording It - Canon DC410 Instruction Manual

Erasing a Photo Right After Recording It

You can erase the still image recorded
last while reviewing it within the time set
for the [REVIEW] option (or immediately
after recording it, if [REVIEW] is set to
[ OFF]).
While reviewing the still image
immediately after recording:
1
Push the joystick (
2
Select (
.
Downloaded From VideoCamera-Manual.com Manuals
52 •
Photos
(
) toward
) [ERASE] and press
Basic Playback
Basic Playback
Viewing Photos
19)
.
1
Move the
images).
2
Turn the
turn it toward MODE and release it
to set the camcorder in PLAY
mode.
The green PLAY indicator will turn on.
3
Push the joystick (
between still images.
Push the joystick (
down to run quickly through the still
images.
(
/ switch to (still
switch to ON, then
) to move
) and hold it
19)