4. Disconnect the couplers (CN01-CN08, CN02-CN06 and
CN03-CN04).
5. Remove the screws (×10
6. Remove the molding props (×9
7. Remove the P(P-1)-Board.
8. Remove the molding props (×5
9. Remove the P(P-2)-Board.
Note:
When assembling the P(P-1)-Board and the P(P-2)- Board,
the position of each hole of the insulation sheets(A, B, C, D)
is set to the position of each hole of the P(P-1)-Board and
the P(P-2)-Board and then assemble them. (
indicate setting positions.)
).
).
).
marks
9
TH-58PX60U