TH-58PX60U
6.19. Remove the C2-Board
1. Remove the flexible cables holder fastening screws (×8
).
2. Disconnect the flexible cables (CA5, CA6, CA7 and CA8).
3. Disconnect the flexible cables (C20, C21, C22 and C23).
4. Remove the screws (×6
6.20. Remove the C3-Board
1. Remove the flexible cables holder fastening screws (×6
).
2. Disconnect the flexible cables (CA9, CA10 and CA11).
3. Disconnect the flexible cable (C33).
4. Disconnect the coupler (C35).
5. Remove the screws (×5
) and remove the C2-Board.
) and remove the C3-Board.
6.21. Remove the stand brackets
and rear mounting metals
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×3
each).
3. Remove the rear mounting metals (left, right) fastening
screws (×4
each).
4. Remove the stand brackets and rear mounting metals.
5. Remove the fastening screws (×4
6. Remove the stand brackets from rear mounting metals.
14
each).