Quick start Guide
Mains lead connection
Connect the AC cord plug to the Plasma TV.
Plasma TV On/Off
C.A.T.S sensor
Plasma C.A.T.S (Contrast Automatic Tracking System)
Plasma C.A.T.S automatically senses the ambient light
conditions and adjusts the brightness and gradation
accordingly, to optimise contrast.
(Effective when Viewing mode is set to Auto.)
PICTURE
SOUND
SET UP
TV/TEXT
INDEX
F.P.
DIRECT
CH SEACH STILL
TV REC
12
Power Indicator
Remote Control Sensor
Press the
Power Indicator: Red (standby)
Press the
TV/AV
Turn the Plasma TV set off by pressing the
while it is on or in standby mode.
Note:
HOLD
The unit will still consume some power as long as the mains lead is still inserted
into the mains outlet.
Connect the mains plug to the mains Outlet
Note:
Mains plug types vary between countries. The mains plug
shown at left may, therefore, not be the type fitted to your set.
Press the On / Off switch on the Plasma TV to turn the set on:
Power-On.
Example: The screen below is displayed for a while after the
Plasma TV is turned on.
(setting condition is an example.)
From the second time on, the below screen is
displayed for a while (setting condition is an
example).
For VIDEO / COMPONENT / TV INPUT:
1
button on the remote control to turn the Plasma TV to standby.
button on the remote control to turn the Plasma TV on.
switch on the Plasma TV