Cable Connection; Antenna Connection; Cable Card Tm Connection - Panasonic TH-37PX50U Operating Instructions Manual

Note:
Cables and connectors are not supplied with this set.
Cable Connection
Antenna Connection
The RF input mode must be set to Antenna (see pages 19, 30).
Back of the TV
Home antenna
VHF UHF
Antenna /_ j_
Terminal or
F-Type Antenna r
Connector
1
Incoming
Cable signal
75 Ohm Coaxial Cable
(5C-2V or higher specification)
CableCARD
TM
Connection
CableCARD TM allows you to tune digital and high definition cable channels through the cable antenna.
Consult your cable company on the availability of CableCARD TM.
_ Procedure
1. Connect the cable antenna to ANT connector.
Turn the TV on (see page 15).
Set the input mode to TV (see page 16).
Insert the CableCARD TM(with upper side facing you) into CableCARD TM slot on the back of the TV.
Follow the messages displayed on the screen.
Back of the TV
Upper side of the card
Notes:
• If you experience keyboard or remote control function hang-up when using CableCARD TM, unplug the TV and plug it
back on and try the controls again. If this condition persists, please call Panasonic Customer Call Center for further
instructions.
• Do not insert a PCMClA card into CableCARD TM slot.
11