Menu List - Panasonic Viera TH-P50X10A Operating Instructions Manual

How to Use Menu Functions

Menu list

Menu
Viewing Mode
Contrast, Brightness,
Colour, Sharpness
Tint
Colour Balance
Colour Management
x.v.Colour
Eco Mode
P-NR
3D-COMB
Reset Picture Defaults
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance
to Wall
MPX
Digital Audio
Preference
SPDIF Selection
MPEG Optical Level
24
Item
Basic picture mode (Dynamic / Normal / Cinema / Game)
Dynamic : Provides enhanced picture contrast and sharpness when viewing in a bright room
Normal : Recommended for viewing under normal ambient room lighting conditions
Cinema : For watching movies in a darkened room producing a cinema-like picture
Game
●
Set for each input signal
Increases or decreases the levels of these options according to your personal
preference
With an NTSC signal source connected to the TV, the picture hue can be adjusted to suit your taste
●
For NTSC or Component / HDMI input signal reception only
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)
Automatically adjusts colours to vivid ones (Off / On)
●
Not valid on PC signal
Increases the colour gradations (Off / Auto)
This is effective when watching HD moving pictures with extended gamut (xvYCC) from
external equipment.
●
HDMI input mode or Movie View mode only
Adjusts picture settings automatically dependent on ambient lighting conditions (Off / On)
Picture Noise Reduction
Automatically reduces unwanted picture noise and flicker noise in the contoured parts of
a picture (Off / Min / Mid / Max)
●
Not valid on PC signal
Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen
Set to "On" to display sharper and more accurate colours (Off / On)
●
For PAL or NTSC signal reception only
●
Not valid on S-Video, Component, PC, HDMI and SD Card
Press the OK button to reset the present Picture Menu to the default settings
Basic sound mode (Music / Speech)
●
Set for each input signal
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / V-Audio)
V-Audio: Provides a dynamic enhancer to simulate improved spatial effects
●
Switching is also possible by the Surround button on the remote control (p. 10).
Adjusts volume of individual channel or input mode
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
●
Over 30cm: Recommended when the back space between the TV and wall is over 30 cm.
●
Up to 30cm: Recommended when the back space between the TV and wall is within 30 cm.
Selects stereo / monaural (Mono / Stereo) (p. 46)
●
Normally: Stereo
●
Stereo signal cannot be received: Mono
●
M1 / M2: Available while mono signal is transmitted
●
Analogue TV mode only
Selects the initial setting for Audio tracks (Dolby D / MPEG)
If programme has both Dolby Digital and MPEG audio tracks, priority is given to what you select
Dolby D: A method of coding digital signals developed by Dolby Laboratories. Apart from
MPEG: An audio compression method that compresses audio to small size without any
considerable loss of audio quality.
●
Digital TV mode only
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
terminal (Auto / PCM)
Auto: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as PCM.
PCM: Dolby Digital is output as PCM. MPEG is output as PCM.
●
Digital TV mode only
You can adjust the audio level of MPEG output from DIGITAL AUDIO OUT terminal as
the initial setting
●
0dB to -12dB in -2dB reductions
●
Digital TV mode only
Adjustments / Configurations (alternatives)
: Game playing time is displayed only when connecting a game equipment.
stereo (2ch) audio, these signals can also be multi-channel audio.