Kenwood KDC-BT7539U Service Manual page 18

KDC-BT7539U/BT8041U
/BT8141UY/BT838U
[ ] Key pressed briefl y: AUDIO data initialization
key (Display) AUD_INIT
[ ] Key pressed briefl y: Forced Power OFF data displayed.
key Press and hold: To clear the forced power OFF infor-
mation. (Press and hold for 2 seconds while the forced
power OFF data is displayed.)
(Display) POFF_ - - - (No Forced Power OFF)
[AUD] Key pressed briefl y: iPod authentication IC installation
key status display
(Display) iPod_ OK_ (Installation status OK)
NG
[FNC] Key pressed briefl y: Multi-function display
key Press and hold: Version & Service information display
mode ON
Refer to the Table 1.
[1]~[6] Key pressed briefl y: Version & Service information display
Key mode ON
(Remote Refer to the Table 1.
controller)
[ ] Key pressed briefl y: CD information display mode ON
key Refer to the Table 2.
Table 1 - Version & Service information display mode
[1] Key pressed briefl y: Version is displayed (Switching)
key (Display) C0715WK__SYS1.23
(Remote (Display) STYPE: ××_PAN1.11
controller) (Display) PTYPE: ×__
∗1 STYPE indicates system μ-com destination, and
PTYPE indicates panel μ-com destination, and
show real-time condition of the destination termi-
nal
[AM]
↓↑ Use the remote controller [1] key or the [
key
[ ] keys to switch.
(Display) BT_VER : HW×××_SW×××
↑
(Display) ADDR
(Display) PIN
[2] Key pressed briefl y: Serial No. is displayed (8 digits)
key (Display) SNo_××××××××
↓
(Remote
[FM]
controller)
key
[3] Key pressed briefl y: Power ON time is displayed.
key (Display) PonTim_0H××_ (00~50 is displayed for "xx".
(Remote
controller)
18
SEC ( Forced Power OFF because of
missing Security Code)
PNL ( Forced Power OFF because of
system μ-com and panel commu-
nication error)
(Installation status NG)
(BT module H/W & S/W Version)
: ××××××××××××
(BT module Address)
: ××××××××
(BT module PIN Code)
When less than 1 hour,
display by increment of 10
minutes.)
××××× (00001-10922 is displayed
for "xxxxxx".)
MAX 10922 (hours)
TEST MODE
[4] Key pressed briefl y: CD operation time is displayed.
[AM] key (Display) CDTim_0H××_ (00~50 is displayed for "xx".
(Remote
key
controller)
↑
↓
[5] Key pressed briefl y: Number of CD EJECT times is
[FM]
key displayed.
key
(Remote (Display) EjeCnt_×××××
controller)
[ ] key Key pressed briefl y: Invalid
Press and hold: To clear the service information that
is being displayed. (Press and hold for 2 seconds
while each service information is displayed.)
[FNC] key Key pressed briefl y: Version & Service information
display mode OFF
Table 2 - CD information display mode
I2C communication condition and CD mechanism error log
display
(Display) I2C_
(Display) ERR_1-
∗ "OK" or "NG" is displayed for "
code is displayed for " / ".
[AM]
CD loading error log display
key
(Display) Load_Error____
(Display) __(1) xx__ (2) xx
↑
(Number of times is displayed for "xx".)
CD ejection error log display
(Display) Eject_Error___
(Display) __(1) xx__ (2) xx
(Display) __(3) xx__ (4) xx
(Number of times is displayed for "xx".)
CD time code error count data display (missing counts)
↓
] /
(Display) Count_Lose
(Display) __CDDA_: xx
[FM]
(Display) __CDROM: xx
key
(Number of times is displayed for "xx".)
CD time code error count data display (count not updated)
(Display) Count_Stay
(Display) __CDDA_: xx
(Display) __CDROM: xx
(Number of times is displayed for "xx".)
[ ] Key pressed briefl y: CD information display mode OFF
key Press and hold: To clear entire CD information (Press and
hold for 2 seconds)
● Initializing AUDIO-related setting value
Press the [ ] key briefl y in the STANDBY source to reset
the AUDIO setting value to the test mode default value.
When less than 1 hour,
display by increment of 10
minutes.)
××××× (00001-10922 is displayed
for "xxxxxx".)
MAX 10922 (hours)
MAX 65535 (times)
____________
, 2- , 3-
". / "—" or the error
MAX 99 (times)
MAX 99 (times)
MAX 99 (times)
MAX 99 (times)