Introduction To Your Newr 401 • R 402 • R 402; Switching On The Machine; Advice On Electrical Connections; Control Panel - Robot Coupe R 401 Manual

INTRODUCTION TO YOUR
NEW R 401 • R 402 •
R 402 V.V. BOWL CUTTER/
VEGETABLE PREPARATION
ATTACHMENT
The food processor is perfectly geared to professional
needs. It can perform any number of tasks, which
you will gradually discover as you use it.
The food processor consists of a bowl cutter and
vegetable preparation attachment. In cutter mode,
it can be used to process meat, vegetables, fine
stuffing, mousse, grinding, kneading,... in less
than 5 minutes for even the longest tasks. In the
vegetable preparation version, the device has a
wide range of discs for thin slicing, grating and
julienne vegetables. The R 402/R 402 V.V. allows
more functions : dicing and French fries.
Its numerous functions will open the door to a whole
new culinary world.
Thanks to its simple design, all components requi-
ring frequent handling for maintenance or cleaning
can be fitted and removed in a trice
This manual contains important information designed
to help the user get the most out of his or her
R 401/R 402/R 402 V.V. bowl cutter/vegetable
preparation device.
We therefore recommend that you read it carefully
before using your machine. We have also included
a few examples to help you get the feel of your new
machine and appreciate its numerous advantages.
SWITCHING ON
THE MACHINE
W A R N I N G
This appliance must be plugged into an
earthed socket (risk of electrocution).

• ADVICE ON ELECTRICAL CONNECTIONS

Before plugging in, check that your power supply
corresponds to that indicated on the machine's
identification plate.
THREE PHASE R 402
The R 402 comes with different types of motor:
400 V / 50 Hz / 3
220 V / 60 Hz / 3
380 V / 60 Hz / 3
This machine is supplied with a cable to which you
simply attach the appropriate electrical plug or iso-
lator for your system. The cable has four wires, one
earth wire, plus three phase wires.
If you have a 4-pin plug :
1) Connect the green and yellow earth wire to the
earth pin.
2) Connect the three other wires to the remaining
pins.
If you have more than 4 pins in the plug, please
note the ROBOT-COUPE does not require a neutral
wire.
Switch on the empty machine, making sure that
the blade is rotating properly in an anti-clockwise
direction.
On the motor unit, a red arrow marks the blade ro-
tation direction.
If the blade turns in a clokwise direction, swap over
two wires.
GREEN / YELLOW is the earth,
DO NOT DISCONNECT
Swap either : the and the
1
the and the
1
or the and the
2
SINGLE PHASE R 401
The R 401 are fitted with various types of motors:
230 V / 50 Hz / 1
115 V / 60 Hz / 1
220 V / 60 Hz / 1
The machine comes with a single phase plug
connected to a power cord.
SINGLE PHASE R 402 V.V. (Variable speed)
The R 402 V.V. is available with a single phase motor
+ variable speed: 230 V / 50 - 60 Hz /1
The standardized plug must be calibrated to a
minimum of 10 amps and preferably 16 amps, if
the appliance is used intensively.

• CONTROL PANEL

R 401
Red switch = Off switch
Green switch = On switch
Black switch = Pulse control
R 402
Red switch = Off switch
Green switch = On switch
Black switch = Pulse control
Speed selector = 750 or 1500 rpm.
R 402 V.V. : Speed variation for cutter bowl from
300 to 3.000 rpm.
for vegetable preparation from
300 to 1.000 rpm.
2
3
3
19