Nvidia Quadro FX 4800 User Manual page 39

Step 3: Choose the Video and Data Formats
1 Click the Graphics to Video Out tree item from the side menu.
2 Specify the video format.
Click the Video Format arrow and then click the signal format you want to use.
Video Format controls the video resolution, field rate, and SMPTE signalling standard
for the outgoing video stream.
Note: Only those resolutions that your monitor supports appear in the Video Format
•
•
3 Specify the Data Format
Click the Output Data Format arrow and then click the color format you want to use.
Data Format controls the color model, data packing, and alpha or z components in the
outgoing video stream.
Step 4: Begin SDI Output
Click Enable Clone Mode.
NVIDIA Corporation
Quadro FX 4800/5800 and Quadro CX SDI User's Guide – Version 1.0
list. Your options for this setting also depend on which Sync option you chose in
the previous step.
genlock synchronization
If you chose
format. The list box will be grayed out, preventing you from choosing another
format.
frame lock synchronization
If you chose
the detected sync signal will appear in the Output Video Format list.
Linux—Using the Graphics to Video Out Control Panel
, the sync source controls the output video
, only those modes that are compatible with
C 4
HAPTER
35