Nvidia Quadro FX 4800 User Manual page 23

•
•
See "Synchronizing the SDI Output to an External Source" on page
information.
6 Check the Terminate the analog signal at this connector check box if
•
•
7 Choose the SDI output data format by clicking the SDI output format list arrow and
then selecting from the list of available color formats.
8 Click OK when done to close the dialog box.
9 Click Apply.
NVIDIA Corporation
Quadro FX 4800/5800 and Quadro CX SDI User's Guide – Version 1.0
To synchronize the frame rate of the SDI output to the external signal using frame
lock, select Frame‐accurate synchronization using this format, then click the list
arrow and choose from the list of available SDI signal formats.
To introduce a delay in the SDI output, enter the pixel or line delay values in the
appropriate HSYNC or VSYNC delay boxes.
the system is a standalone system synchronized to a house sync signal, or
the system is the last in a chain of systems connected to the same house sync signal.
Windows–Using the Graphics to SDI Control Panel
C 3
HAPTER
20 for additional
19