C
4
HAPTER
Linux—Using the Graphics to Video Out Control Panel
Step 2: Choose a Synchronization Method
1 Click the Graphics to Video Out: Synchronization Options tree item from the side
menu.
The Sync Options page appears.
2 From the Sync Options group box, click the Sync Mode list arrow and then click the
method you want to use to synchronize the SDI output:
•
•
•
This list is limited to timings that can be synchronized with the detected external sync
signal.
3 Check the Enable Composite Termination check box if
•
•
For more information regarding genlock and frame lock, see the section "Synchronizing
the SDI Output to an External Source" on page
34
Free Running: The SDI output will be synchronized with the timing chosen from the
SDI signal format list.
Genlock: The SDI output will be synchronized with the external sync signal.
Frame Lock: The SDI output will be synchronized with the timing chosen from the
SDI signal format list.
the system is a standalone system synchronized to a house sync signal, or
the system is the last in a chain of systems connected to the same house sync signal.
Quadro FX 4800/5800 and Quadro CX SDI User's Guide– Version 1.0
44.
NVIDIA Corporation