Performance Monitor Pm-31 - Furuno FAR-2117 Installation Instruction

4.4 Performance Monitor PM-31

This kit is installed in the antenna unit of the FAR-2107/2807 series X-band radar to monitor
radar performance.
Name: Performance monitor
Type: PM-31
Code no.: 008-080-438
Name
① SCANNER COVER ASSY.
② GREASE
③ SM-XH CONNECTOR
ASSY.
④ LIFTING FIXTURE
⑤ GASKET
Procedure
To hoist the scanner cover assy. to the radar mast, by using rope, attach the lifting fixture ④ to
the scanner cover assy.①.
1. Remove the bolt and chain at the bottom of the stern-side cover, and then remove the
cover.
2. Coat the bolt hole on the scanner cover assy.① with silicone sealant (Adhesive 1211)
and secure the chain with the bolt.
3. Remove the cover at the bow side also.
4. Insert the XH connector of the SM-XH connector ③ assy. to J911 on TB board 03P9349
and the SM connector of the SM-XH connector assy. to the relay plate.
5. Coat the gasket ⑤ with the gasket grease #2 50G ② and attach it to the scanner cover
assy.①.
6. Connect the cable assembly coming from the scanner cover assy.① to the SM connector
attached at step 4 above.
7. Attach the scanner cover assy. to the stern side of the antenna unit.
8. Reattach the bow-side cover.
4. INSTALLING OPTIONAL EQUIPMENT
Type
PM-31
GASKET GREASE #2
50G
03-2108（6P-6P)
03-001-3264
03-001-3263
Code number Qty
008-539-430 1
000-149-704 1
008-534-840 1
300-132-640 1
300-132-631 1
4-15