Canon POWERSHOT a75 User Manual page 109

Downloaded From camera-usermanual.com Canon Manuals
DIGITALTerminal
1.Open the terminal cover with
your finger nail.
2.Insert the connector until it clicks.
Always grasp the
connector to remove
the interface cable from
the camera's DIGITAL
terminal.
3
Set the camera's mode switch to
4
Press the ON/OFF button until the
power lamp lights green.
Windows
Proceed to steps 5 and 6 below.
Macintosh
Refer to the Software Starter Guide and
download images.
Various Functions
5
Select [Canon CameraWindow] in
the events dialog that appears on
the computer and click [OK] (first
time only).
.
If the events dialog fails to appear, click the
[Start] menu, followed by [Programs] or
[All Programs], [Canon Utilities],
[CameraWindows], and [CameraWindow -
Set Auto-Launch].
107