Cable cover removal and fitting
Note:
To avoid interference appearing on the screen, do not bundle the RF cable and mains lead together.
How to open the front cover
Lift up the cover where the mark "
How to use the LCD stand
Adjust the stand to your desired angle. The stand angle can be adjusted between 40 ° right-and-left direction.
Note:
The stand angle cannot be adjusted forward and backward.
6
Removal
2
1
Fitting
2
1
1
" is shown.
1. Push down hooks and pull the cover slightly towards
yourself to disengage the claws (at 4 points).
2. Slowly pull out in the downward direction.
1. Insert the claws (at 4 points) at the bottom end.
2. Push until it clicks.
(View from the top)
Front