Getting To Know Your Zotac Zbox; Front View - Zotac ZBOX User Manual

ZOTAC ZBOX

Getting to know your ZOTAC ZBOX

Front view

Refer to the diagram below to identify the components on this side of the system
1. Power switch
The power switch allows powering ON and OFF the system. The ring LED can be disabled
in BIOS setting.
2. Combo USB 3.0 port / Memory card slot
The Combo USB 3.0 port / Memory card slot is compatible with USB 3.0 devices or SD/SDHC/
SDXC cards used in devices like digital cameras, MP3 players, mobile phones and PDAs.
3. Power LED
The Power LED blinks when power is on.
4. WiFi LED
The WiFi LED is always ON when WiFi was active.
5. Hard disk LED
The hard disk LED blinks when data is being written into or read from the hard disk drive.
6. Microphone jack
The microphone jack is designed to connect the microphone used for video conferencing,
voice narrations or simple audio recordings.
7. Headphone/Audio Out jack
The stereo headphone jack (3.5mm) is used to connect the system's audio out signal to
amplified speakers or headphones.
8. USB 3.0 Type-C port
The USB 3.0 type-C port supports the SuperSpeed USB 3.0 devices and is backwards
compatible with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for maximum
performance with USB 3.0 compatible devices.
6
1
3
2 6 7
4 5 8