Using Your Zotac Zbox; Configuring A Wireless Connection - Zotac ZBOX User Manual

• NVIDIA Graphics Driver
• Ethernet PCI-E Driver
• Wireless Network Driver
• Intel Management Engine
• Bluetooth Driver
• CIR Driver
• MassStorage Driver
• USB Charger (optional)
Note: If you want to use high-amperage USB charging for smartphones and tablets,
please install the driver USB Charger driver.
 Each driver must be installed individually to ensure proper operation of the ZOTAC ZBOX.
3. Select the driver you want to install. The driver installer should launch.
4. Follow the onscreen instructions to install the drivers.
5. Restart the system.

Using your ZOTAC ZBOX

Configuring a wireless connection

Please follow the instructions below to connect to a wireless network:
1. Double-click the wireless network icon (pic) in the notification area.
2. Select the wireless network you want to connect to from the list and
click Connect.
3. After connection is established, you will see "Connected."
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.
ZOTAC ZBOX
17