Setting Your Logo (Name/Company) - Panasonic UF-490 Operating Instructions Manual

Setting Your LOGO (NAME/COMPANY)

When you send a document, your LOGO appears on the top of the copy printed out at the other station.
The LOGO helps to identify you to someone who receives your transmission.
1
2
1
3
4
5
Enter your LOGO (max. 25 characters and digits) by using
the Keypad.
Ex:
P A N A S O N I C
If you make a mistake, use
one space beyond the incorrect character, press
then re-enter the new character.
If more than 11 characters are entered, the left side
characters will scroll off the display.
6
1. Your Company Name or your name must be set as your LOGO because it is required by the
NOTE
Telephone Consumer Act of 1991. (For details, see FCC NOTICE at the end of this Operating
Instructions)
7
2
or to move the cursor
User Parameters
SET MODE
USER PARAMETERS?
COMPANY/NAME?
NAME:
NAME:PANASONIC
CLEAR
(1-8)
23