Controlling A Cassette Recorder - Onkyo HT-RC160 Instruction Manual

Controlling Other Components—Continued
r PLAY MODE button
Selects play modes on components with selectable
play modes.
Works as a Resume button when used with a DS-A2
RI Dock.

Controlling a Cassette Recorder

By pressing the REMOTE MODE button that's been
programmed with the remote control code for your cas-
sette recorder, you can control your cassette recorder
with the following buttons.
The [TV/TAPE] button is preprogrammed with the
remote control code for controlling an Onkyo cassette
recorder when used with an u connection.
For details on entering a remote control code for a differ-
ent component, see page 88.
Press the appropriate
REMOTE MODE button first
a
b
c
d
e
* With some components, certain buttons may not work as
expected, and some may not work at all.
96
s RANDOM button
Used with the shuffle function.
Note:
With some components, certain buttons may not work as
expected, and some may not work at all.
On twin cassette decks, only Deck B can be controlled.
a ON/STANDBY button
Turns the cassette recorder on or off.
b Previous and Next [7]/[6] buttons
The Previous [7] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [6] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [7]/[6] buttons may not work prop-
erly with some cassette tapes.
c Rewind and Fast Forward [5]/[4]
buttons
The Rewind [5] button starts rewind. The Fast
Forward [4] button starts fast forward.
d Reverse Play [t] button
f
Starts reverse playback.
e Play [1] button
Starts playback.
g
f MUTING button (52)
Mutes or unmutes the AV receiver.
g VOL [q]/[w] button (50)
Adjusts the volume of the AV receiver.
h Stop [2] button
Stops playback.
Note:
An Onkyo cassette recorder connected via u can also
be controlled in Receiver mode.
h