Listening To Recorded Messages - Panasonic KX-FT74HK Operating Instructions Manual

Incoming Messages (KX-FT78 only)

Listening to recorded messages

Incoming Messages (KX-FT78 only)
PLAY MESSAGES
{SLOW}
{QUICK}
{ERASE}
{+} {-} {<} {>}
{FAX/START}
{SET}
When the unit has recorded new voice
messages;
– The PLAY MESSAGES indicator will
flash.
– The display will show the total number of
recorded messages.
Example:
– Slow beeps will sound if the message
alert feature is activated (feature #42 on
page 73).
Press {PLAY MESSAGES}.
L Only the new recorded messages will be
played.
L Adjust the speaker volume using {+} or
{-}.
-62-
FLASH/LIGHT
{STOP}
TEL
TAD TAD
CALLS CALLS FAX
L After playing back all of the new
messages, the PLAY MESSAGES
indicator will stop flashing but will remain
lit up. If you press {PLAY MESSAGES}
at this time, all the recorded messages
will be played.
To repeat a message
Press {<} while listening to the message.
L If you press {<} within 5 seconds of the
beginning of the message, the previous
message will be played.
L To play back a specific message, press
{<} or {>} and search for the message
you want to listen to.
To skip a message
Press {>} to play the next message.
To stop playback
Press {STOP}.
L If you press {PLAY MESSAGES} within
1 minute, the unit will resume playing the
rest of the messages.
Voice time/day stamp
During playback, a synthesised voice will
announce the time and day of the week that
each message was recorded.
To change the playback speed
Press {QUICK} to play messages at one
and a half times the original speed. Press
{SLOW} to play messages at half the
original speed.
L To return to the original speed, press
{QUICK} or {SLOW} again during quick
or slow playback.