Table of Contents
Advertisement
L Make sure that the ink film is wrapped
around the blue core (2) at least once.
Correct
2
Incorrect
The ink film is not wrapped
around the blue core.
6
First close the back cover securely (1) by
pushing down on the dotted area at both
ends (2). Then close the front cover
securely (3).
1
3
1 turn
Tight
Slack/Crease
Reverse
2
7
Remove the recording paper and straighten.
Pull the tension plate forward (1) and hold
open while inserting the paper.
8.4.2 When the recording paper
was not fed into the unit properly
The display will show the following.
Remove the recording paper and straighten. Pull
the tension plate (1) forward and hold open
while inserting paper.
Press {START} to clear the message.
{START}
8. Help
1
CHECK PAPER
1
45
Advertisement
Table of Contents
