Table of Contents
Advertisement
Feature/Code
Setting friendly reception
{#}{4}{3}{8}
Receiving a fax into the
computer
{#}{4}{4}{2}
Resetting advanced
features to their default
settings
{#}{4}{5}{9}
Selection
To receive a fax automatically when you answer a call and hear a fax
calling tone (slow beep).
{0} "OFF": You have to press {FAX START} for fax reception.
{1} "ON" (default): You do not have to press {FAX START} for fax
reception.
If you wish to receive a fax into the computer, activate this feature.
{0} "OFF" (default): Deactivates this feature.
{1} "ALWAYS": If the unit recognizes the connection to the computer, it
will transfer a received document to the computer. If the unit cannot
recognize the connection, it will store a received document in the
memory once, then transfer the data after recognition of the
connection.
{2} "CONNECTED": If the unit recognizes the connection to the
computer, it will transfer a received document to the computer. If the
unit cannot recognize the connection, it will print out the data.
{0} "NO" (default)
{1} "YES"
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {4}{5}{9}.
3. Press {1} to select "YES".
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
8. Programmable Features
57
Advertisement
Table of Contents
